The best way to learn how to write queries is to build on the work others have done.
Modify these queries and submit them to the SQL Search tool to see what they do!
More sample queries are available on the SQL Search , in the panel next to the query window.
SELECT TOP 100 objID, ra, dec -- Get the unique object ID and coordinates FROM PhotoPrimary --From the table containing photometric data for unique objects WHERE ra > 185 and ra < 185.1 AND dec > 15 and dec < 15.1 -- that matches our criteriaLoad Query Copy link to this query
-- Find galaxies within 1' of a given point (ra=185.0, dec=-0.5). -- This is a slightly more complex query, but it can be easily adapted to search --around any point in the sky. --To see how to limit the search only to objects with clean photometry, see the -- Clean imaging query. SELECT TOP 100 G.objID, GN.distance FROM Galaxy as G JOIN dbo.fGetNearbyObjEq(185., -0.5, 1) AS GN ON G.objID = GN.objID ORDER BY distanceLoad Query Copy link to this query
-- This query introduces the PhotoTag table, which contains the most frequently used columns -- of PhotoObj. Queries to PhotoTag will run more quickly than those to photoObj. -- This sample query finds data for all objects in fields with desired PSF width. SELECT TOP 100 r.run, r.rerun, f.camCol, f.field, p.objID, p.ra, p.dec, p.modelMag_r, f.psfWidth_r FROM PhotoTag AS p JOIN Field AS f ON f.fieldid = p.fieldid JOIN Run AS r ON f.run = r.run WHERE mode = 1-- select primary objects only and f.psfWidth_r > 1.2 and p.modelMag_r < 21 and r.stripe = 21Load Query Copy link to this query
--The BETWEEN statement can be used to set constraints on a range of values. -- This sample query finds galaxies with g magnitudes between 18 and 19. SELECT TOP 10 objID, cModelMag_g FROM Galaxy WHERE cModelMag_g between 18 and 19 -- 18 < cModelMag_g < 19Load Query Copy link to this query
-- There are several built-in functions available to CAS users that make spatial --queries, i.e., those with coordinate cuts, much more efficient than simply --including the coordinate constraints in the WHERE clause.This example --illustrates the use of the dbo.fGetObjFromRectEq function that invokes --the Hierarchical Triangular Mesh(HTM) functionality. -- a) Rectangular search using straight coordinate constraints: SELECT objID, ra, dec FROM PhotoObj WHERE(ra between 179.5 and 182.3) and(dec between - 1.0 and 1.8) -- b) This query can be rewritten as follows to use the HTM function that returns a --rectangular search area(The "Run this Query" button above will run this query): --SELECT p.objID, p.ra, p.dec --FROM PhotoObj p --JOIN dbo.fGetObjFromRectEq(179.5, -1.0, 182.3, 1.8) r ON p.objID = r.objIDLoad Query Copy link to this query
-- When you need to search for data in two or more tables, you must "join" the tables -- together for the purposes of your query by using a JOIN...ON statement. --JOIN...ON allows you to search for data and/ or constraints in both tables. -- The syntax of the statement is: --JOIN[the second table] ON[a variable the tables have in common]. -- The variable the tables have in common is called the "key" (think of it -- as the key that unlocks your ability to search two tables). -- The key variable(s) in each table are shown on the About the Database page. -- Find the two tables you want to join and look for a key variable they have in common. -- The sample query looks for spectra of quasars and shows the date and time at which -- each spectrum was taken. SELECT TOP 100 sp.objID, sp.ra, sp.dec, sp.mjd, px.taiBegin, px.taiEnd, sp.fiberID, sp.z FROM specPhoto AS sp JOIN plateX AS px ON sp.plateID = px.plateID WHERE (sp.class='QSO') AND sp.z > 3Load Query Copy link to this query
-- Find galaxies within 1' of a given point (ra=185.0, dec=-0.5). -- This is a slightly more complex query, but it can be easily adapted to search --around any point in the sky. --To see how to limit the search only to objects with clean photometry, see the -- Clean imaging query. SELECT TOP 100 G.objID, GN.distance FROM Galaxy as G JOIN dbo.fGetNearbyObjEq(185., -0.5, 1) AS GN ON G.objID = GN.objID ORDER BY distanceLoad Query Copy link to this query
--This simple query introduces two important SQL structures while showing how to count the number of -- spectra of each spectral classification(galaxy, quasar, star) in DR8. -- When included in the SELECT block, the count(*) statement returns the number of objects that -- meet your search criteria. -- The GROUP BY statement sorts results into groups(categories) based on the value of a data column. -- In this query, the grouping occurs on the 'class' column of the SpecObj view, which contains -- the spectral classification of the object. -- The query can be easily modified to find object counts sorted by other columns. -- For another example, see the Counts by Type and Program sample query. SELECT class, count(*) FROM SpecObj GROUP BY classLoad Query Copy link to this query
-- Another useful query is to select stars that are not saturated. -- This query introduces bitwise logic for flags, and uses the 'as' syntax to -- make the query more readable. Note that if a flag is not set, the value -- will be zero. If you want to ensure multiple flags are not set, you can -- either check that each individually is zero, or their sum is zero. -- (From Gordon Richards) -- Important caveat: The 'flags' column is the union of the flag values in -- each band,and using it may produce unexpected results, for example if a -- bad flag bit is set in only one band (e.g. in the 'flags_r' value), that bit -- will be bad in the overall 'flags' value as well. For more information, -- please see the 'Photometric flags detail' entry in Algorithms. -- NOTE: This query takes a long time to run without the "TOP 1000". SELECT TOP 1000 objID, ra, dec, psfMag_u, psfMag_g, psfMag_r, psfMag_i, psfMag_z, dbo.fPhotoFlagsN(flags) FROM Galaxy WHERE (flags & (dbo.fPhotoFlags('SATURATED'))) != 0Load Query Copy link to this query
-- Give me the colors of a random 1% sample of objects from all fields that -- are "survey quality" so that I could plot up color-color diagrams and play -- around with more sophisticated cuts. Query requested by Karl Glazebrook. -- Uses the HTM spatial index ID as a random number generator. The htmID is -- multiplied by a prime number (37) to remove bias and generate a random number -- from the lowermost 16 bits. This number is then constrained to be between 650 -- and 65000 to generate a random sample between 1 and 100% of the data -- respectively. So replacing the "1" by a different number between 1 and 99 -- will generate a sample of the required percentage of objects. -- Note that this is much faster than the standard "ORDER BY RANDOM()" SQL method. SELECT TOP 100 u, g, r, i, z FROM Galaxy WHERE (htmid*37 & 0x000000000000FFFF) < (650 * 1) -- Replace the "1" with a number < 99 to get a higher percentage data subsampleLoad Query Copy link to this query
-- This query introduces the Neighbors table, which contains each -- object's neighbors within 30 arcseconds. -- Find all objects within 30 arcseconds of one another -- that have very similar colors: that is where the color ratios -- u-g, g-r, r-I are less than 0.05m. SELECT TOP 10 P.ObjID -- distinct cases FROM PhotoPrimary AS P -- P is the primary object JOIN Neighbors AS N ON P.ObjID = N.ObjID -- N is the neighbor link JOIN PhotoPrimary AS L ON L.ObjID = N.NeighborObjID -- L is the lens candidate of P WHERE P.ObjID < L. ObjID -- avoid duplicates and abs((P.u-P.g)-(L.u-L.g))<0.05 -- L and P have similar spectra. and abs((P.g-P.r)-(L.g-L.r))<0.05 and abs((P.r-P.i)-(L.r-L.i))<0.05 and abs((P.i-P.z)-(L.i-L.z))<0.05Load Query Copy link to this query
-- A complex query from Robert Lupton that uses the Neighbors table to find -- selected neighbors in a given run+camcol. Contains a nested query with -- join, joined with the query results to select only neighbors that meet -- criteria. Nested queries are required because the Neighbors table does -- not contain all parameters for neighbor objects SELECT TOP 10 obj.run, obj.camCol, str(obj.field, 3) as field, str(obj.rowc, 6, 1) as rowc, str(obj.colc, 6, 1) as colc, str(dbo.fObj(obj.objId), 4) as id, str(obj.psfMag_g - 0*obj.extinction_g, 6, 3) as g, str(obj.psfMag_r - 0*obj.extinction_r, 6, 3) as r, str(obj.psfMag_i - 0*obj.extinction_i, 6, 3) as i, str(obj.psfMag_z - 0*obj.extinction_z, 6, 3) as z, str(60*distance, 3, 1) as D, dbo.fField(neighborObjId) as nfield, str(dbo.fObj(neighborObjId), 4) as nid FROM ( SELECT obj.objId, run, camCol, field, rowc, colc, psfMag_u, extinction_u, psfMag_g, extinction_g, psfMag_r, extinction_r, psfMag_i, extinction_i, psfMag_z, extinction_z, NN.neighborObjId, NN.distance FROM PhotoObj as obj JOIN neighbors as NN on obj.objId = NN.objId WHERE 60*NN.distance between 0 and 15 and NN.mode = 1 and NN.neighborMode = 1 and run = 756 and camCol = 5 and obj.type = 6 and (obj.flags & 0x40006) = 0 and nchild = 0 and obj.psfMag_i < 20 and g - r between 0.3 and 1.1 and r - i between -0.1 and 0.6 ) as obj JOIN PhotoObj as nobj on nobj.objId = obj.neighborObjId WHERE nobj.run = obj.run and (abs(obj.psfMag_g - nobj.psfMag_g) < 0.5 or abs(obj.psfMag_r - nobj.psfMag_r) < 0.5 or abs(obj.psfMag_i - nobj.psfMag_i) < 0.5)Load Query Copy link to this query
-- Using object counting and logic in a query. -- Find all objects similar to the colors of a quasar at 5.5 SELECT count(*) as 'total', sum( case when (Type=3) then 1 else 0 end) as 'Galaxies', sum( case when (Type=6) then 1 else 0 end) as 'Stars', sum( case when (Type not in (3,6)) then 1 else 0 end) as 'Other' FROM PhotoPrimary -- for each object WHERE (( u - g > 2.0) or (u > 22.3) ) -- apply the quasar color cut. and ( i between 0 and 19 ) and ( g - r > 1.0 ) and ( (r - i < 0.08 + 0.42 * (g - r - 0.96)) or (g - r > 2.26 ) ) and ( i - z < 0.25 )Load Query Copy link to this query
-- Create a count of galaxies for each of the HTM triangles. -- Galaxies should satisfy a certain color cut, like -- 0.7u-0.5g-0.2i<1.25 && r<21.75, output it in a form -- adequate for visualization. SELECT (htmID / power(2,24)) as htm_8 , -- group by 8-deep HTMID (rshift HTM by 12) avg(ra) as ra, avg(dec) as [dec], count(*) as pop -- return center point and count for display FROM Galaxy -- only look at galaxies WHERE (0.7*u - 0.5*g - 0.2*i) < 1.25 -- meeting this color cut and r < 21.75 -- brighter than 21.75 magnitude in red band. group by (htmID /power(2,24)) -- group into 8-deep HTM buckets.Load Query Copy link to this query
-- Compare different redshift measurements of the same object for objects -- with high redshift SELECT prim.bestObjId, prim.mjd AS PrimMJD, prim.plate AS PrimPlate, other.mjd AS OtherMJD, other.plate AS OtherPlate, prim.z AS PrimZ, other.z AS OtherZ, plate.programname FROM SpecObjAll prim JOIN SpecObjAll other ON prim.bestObjId = other.bestObjId JOIN platex AS plate ON other.plate = plate.plate AND other.mjd = plate.mjd WHERE other.bestObjId > 0 AND prim.sciencePrimary = 1 AND other.sciencePrimary = 0 AND prim.z > 2.5 ORDER BY prim.bestObjIdLoad Query Copy link to this query
-- The flag fields in the SpecObjAll table are 64-bit, but some -- analysis tools (and FITS format) only accept 32-bit integers. -- Here is a way to split them up, using bitmasks to extract -- the higher and lower 32 bits, and dividing by a power of -- 2 to shift bits to the right (since there is no bit shift -- operator in SQL.) The hexadecimal version can be used for debugging -- to make sure you are splitting them up right. SELECT TOP 10 objid,ra,dec, flags, -- output the whole bigint as a check flags & 0x00000000FFFFFFFF AS flags_lo, -- get the lower 32 bits with a mask -- shift the bigint to the right 32 bits, then use the same mask to -- sget upper 32 bits (flags/power(cast(2 as bigint),32)) & 0x00000000FFFFFFFF AS flags_hi FROM PhotoObj -- Hexadecimal version of above query - use for debugging -- SELECT TOP 10 objid,ra,dec, -- CAST(flags AS BINARY(8)) AS flags, -- CAST(flags & 0x00000000FFFFFFFF AS BINARY(8)) AS flags_lo, -- CAST((flags/POWER(CAST(2 AS BIGINT),32)) & 0x00000000FFFFFFFF AS BINARY(8)) AS flags_hi -- FROM PhotoObjLoad Query Copy link to this query
-- This query demonstrates the use of a LEFT OUTER JOIN to include rows from the joined table -- that do not satisfy the JOIN condition. The OUTER JOIN (LEFT or RIGHT) -- is an inclusive JOIN, whereas the INNER (default) JOIN is an exclusive JOIN. -- In this case the query returns galaxies with or without spectra that meet the criteria -- in the WHERE clause. The ISNULL operator is used to replace null -- values with zeros for galaxies without spectra. SELECT TOP 10 p.objid, p.ra, p.dec, ISNULL(s.specobjid,0) AS specobjid, ISNULL(s.z, 0) AS z FROM Galaxy AS p LEFT OUTER JOIN SpecObj s ON s.bestObjID = p.objID WHERE p.u BETWEEN 0 AND 19.6 AND p.g BETWEEN 0 AND 20Load Query Copy link to this query
-- This query demonstrates, among other tings, a nested query (a query -- inside a query, where the outer query operates on the result of the inner query. The -- query turns sky brighness into flux, which illustrates the -- the POWER() function, and uses CAST to get a floating -- point. The First table contains matches between SDSS and FIRST survey objects. SELECT TOP 10 fld.run, fld.avg_sky_muJy, fld.runarea AS area, ISNULL(fp.nfirstmatch,0) FROM ( --first part: for each run, get total area and average sky brightness SELECT run, sum(primaryArea) AS runarea, 3631e6*avg(power(cast(10. as float),-0.4*sky_r)) as avg_sky_muJy FROM Field GROUP BY run ) AS fld LEFT OUTER JOIN ( -- second part: for each run, get total number of FIRST matches. To get the run number -- for each FIRST match, join FIRST with PHOTOPRIMARY. Some runs may have -- 0 FIRST matches, so these runs will not appear in the result set of this subquery. -- But we want to keep all runs from the first query in the final result, so -- we need a LEFT OUTER JOIN to return all rows from the first subquery and match -- with corresponding rows from the second query - or else return NULL. The ISNULL() -- function converts this NULL into a 0 for readability. SELECT p.run, count(*) AS nfirstmatch FROM FIRST AS fm INNER JOIN photoprimary as p ON p.objid=fm.objid GROUP BY p.run ) AS fp ON fld.run=fp.run ORDER BY fld.runLoad Query Copy link to this query
-- Here is a simple query for objects with reliable redshift estimation in the 0.4 < z < 0.5 range -- The query uses the Photoz table that contains photometric redshift estimates for galaxies. SELECT TOP 100 objId,z,zErr,absMagR FROM Photoz WHERE z BETWEEN 0.4 and 0.5 and photoErrorClass=1 -- the estimated object has low photometric errors, and enough nearest and nnCount>95 -- neighbors in the reference set; note that zErr=-9999 indicates an and zErr BETWEEN 0 and 0.03 -- unreliable redshift estimate, hence the lower bound on zErr -- A simple luminosity function with the same selection criteria as above -- Returns a histogram of absolute magnitudes for the given redshift range. -- (You will need to cut and paste this query if you want to run it in the SQL Search page, -- the above buttons will only load/run the first query). -- SELECT round(absMagR,1) as absMagR, COUNT(*) as cnt -- FROM Photoz -- WHERE -- z BETWEEN 0.4 and 0.5 -- and photoErrorClass=1 and nnCount>95 -- and zErr BETWEEN 0 and 0.03 -- group by round(absMagR,1) -- order by round(absMagR,1)Load Query Copy link to this query
-- This sample query find objects with spectra in the -- regular program of the SEGUE-2 survey. It checks -- both the "survey" tag (which tells you the overall -- survey) and the "programname" tag (which distinguishes -- subprograms within each survey). The PlateX table -- also has the survey and programname tags. SELECT TOP 50 ra, dec, specobjid, plate, mjd, fiberid FROM specObj WHERE survey = 'segue2' and programname = 'segue2'Load Query Copy link to this query
-- There are five possible survey names ("sdss", "segue1", -- "segue2", "boss" and "apogee", though APOGEE is not -- available in DR9 and earlier). Within each survey there -- can be a number of programnames; the main programs -- of each survey are: -- survey = 'sdss' and programname = 'legacy' -- survey = 'segue1' and programname = 'segue' -- survey = 'segue2' and programname = 'segue2' -- survey = 'boss' and programname = 'boss' -- For the SEGUE-1 and SDSS surveys in particular there -- are multiple programs. A full list of surveys and programs -- can be obtained with: SELECT DISTINCT survey, programname FROM platex ORDER BY surveyLoad Query Copy link to this query
-- List the number of each type of object observed by each -- special spectroscopic observation program. SELECT plate.programname, class, COUNT(specObjId) AS numObjs FROM SpecObjAll JOIN PlateX AS plate ON plate.plate = specObjAll.plate GROUP BY plate.programname, class ORDER BY plate.programname, classLoad Query Copy link to this query
-- The WISE_allsky is a straightforward import of the WISE all-sky data release catalog. -- It has hundreds of columns containing all manner of -- WISE measurements. It has 563,921,584 rows. This catalog includes data -- from the first part of the WISE mission, when all four of its mid-IR -- channels (3.4, 4.6, 12, and 22 microns) were operational. It is -- all-sky. -- -- The WISE_xmatch is an astrometric cross-match between the WISE_allsky -- and SDSS photoObj objects. It contains 495,003,196 matches. The -- WISE_xmatch table itself just contains three columns: IDs of the WISE -- and SDSS objects, and the distance between them. I used a matching -- radius of 4 arcsec, and duplicate matches are allowed. -- -- To use the WISE_xmatch table, join on one of the SDSS Photo* tables -- (PhotoObjAll, PhotoPrimary, PhotoTag, Galaxy, Star) and the WISE_allsky -- table, like so: select top 10 S.ra as sdss_ra, S.dec as sdss_dec, W.ra as wise_ra, W.dec as wise_dec, S.psfmag_r as r, W.w1mpro as w1 from wise_xmatch as X join wise_allsky as W on X.wise_cntr = W.cntr join photoTag as S on X.sdss_objid = S.objid where S.nchild = 0Load Query Copy link to this query
-- This query selects multiply-detected sources (stars) in photometry, -- using the thingIndex and detectionIndex tables.thingIndex contains --a list of all unique sources, with a primary key defined called thingId, --and detectionIndex contains the objId of each observation of each -- thingId.The objId can be used to join with the Star view of the photoObjAll table -- in order to recover the photometric data associated with each stellar observation. SELECT TOP 10 t.thingid, t.ndetect, d.objid, p.psfMag_r, p.psfMagerr_r FROM thingIndex AS t JOIN detectionindex AS d ON t.thingid = d.thingid JOIN Star AS p ON d.objid = p.objid WHERE t.ndetect > 1Load Query Copy link to this query
-- The detectionIndex table contains all detections of a given physical object, -- which is uniquely identified by the "thingid".In order to extract photometry, --you need a join with the PhotoObjAll table, using the objid. --There is also a flag field called isPrimary, which is 1 for the object that -- is found on a primary polygon / field, all the other detections have 0 in this field. -- Here is a compound query to find all time series around a certain object with a thingid = 97423000 SELECT LTRIM(STR(mjd_r, 20, 2)) AS MJD, dbo.fSDSS(p.objId) AS ID, modelMag_g, modelMagErr_g, modelMag_r, modelMagErr_r, modelMag_i, modelMagErr_i, p.ra, p.dec INTO #list FROM detectionindex d JOIN PhotoObjAll p ON d.objid = p.objid JOIN Field f ON p.fieldid = f.fieldid WHERE d.thingid = 97423000 ORDER BY 1 -- -- Now find objects near each of the detections -- SELECT a.*, b.* FROM #list a CROSS APPLY dbo.fGetNearbyObjEq(a.ra, a.dec, 0.1) bLoad Query Copy link to this query
--SkyServer includes views called Star and Galaxy, which --contain photometric data(but no spectral data such as --redshift) for stars and galaxies respectively. -- This sample query shows how you can search for data -- for galaxies using the Galaxy view.Searching for stars -- using the Star view would work the same, but with --"Star" in the FROM clause. -- This sample query finds 1000 galaxies -- brighter thanr-magnitude 22, extinction - corrected. -- You could remove the "TOP 1000" to find all galaxies brighter -- than r = 22, but it would take a long time to run and might --time out. SELECT TOP 1000 objID FROM Galaxy WHERE (r - extinction_r) < 22Load Query Copy link to this query
--One of the most important requirements for selecting data --useful for research is to select only data that has passed -- a certain standard of clean photometry.Starting with DR8, --the SDSS - III has made this easier by providing a flag called CLEAN -- that indicates that an object's photometry has passed all tests -- to bedeclared useful for science.A value of CLEAN = 1(true) -- indicates that that object's photometry has been vetted as clean. -- For more on using flags, see the Using Flags Sample Query. -- In some contexts, it is important to know what conditions -- are required for theimaging pipeline to set the CLEAN flag, --so that you can adjust these requirements to suit your needs. -- The CLEAN flag works differently for stars and galaxies.For stars, --see the Clean photometry - stars sample query.For galaxies, --see the Clean photometry - galaxies sample query. SELECT top 10 objID, ra, dec, g, clean FROM PhotoObj WHERE CLEAN = 1Load Query Copy link to this query
--This sample query allows you to find the MJD(astronomical date) --on which a specific SDSS-III field was observed. (This query uses -- the r - band, but you can specify other magnitude bands. -- It also returns only fields observed after MJD 53140(May 15, 2004). -- There is an online calculator for converting between MJDs and -- calendar dates. -- This query uses the Field table, which contains data on SDSS fields. -- It is also possible to search for the observation date of a specific -- object by joining the Field table with the PhotoObj table or its -- associated views. SELECT top 100 run, rerun, camcol, field, mjd_r as primary_mjd FROM Field WHERE mjd_r > 53140Load Query Copy link to this query
-- DR8 handles searches by spectral lines differently than previous -- releases. In addition, spectral lines for galaxies and stars are -- identified through different processes. -- Spectral lines for galaxies are calculated using the MPA-JHU -- spectroscopic reanalysis (Tremonti et al. 2004; Brinchmann et al. 2004) -- and are stored in the galSpecLine table. For more on how spectral lines -- of galaxies are found, see the Galspec page of the sdss3.org website. -- Spectral lines for stars are calculated using the SEGUE Stellar Parameter -- Pipeline (SSPP; Lee et al. 2008) and are stored in the sppLines -- table. For more on how spectral lines of stars are found, see -- the SSPP page of the sdss3.org website. -- The "Run this Query" button will run the second query, which finds stars -- by searching CaII lines. -- a) Finding galaxies by their emission lines: -- This query selects galaxy spectra with high internal reddening, -- as measured by the standard Balmer decrement technique. It -- makes use of the galSpec tables for the measurements of -- galaxy lines. In this case we use galSpecLine, which has -- emission line measurements. SELECT TOP 10 s.plate, s.fiberid, s.mjd, s.z, s.zwarning, g.h_beta_flux, g.h_beta_flux_err, g.h_alpha_flux, g.h_alpha_flux_err FROM GalSpecLine AS g JOIN SpecObj AS s ON s.specobjid = g.specobjid WHERE h_alpha_flux > h_alpha_flux_err*5 AND h_beta_flux > h_beta_flux_err*5 AND h_beta_flux_err > 0 AND h_alpha_flux > 10.*h_beta_flux AND s.class = 'GALAXY' AND s.zwarning = 0 -- b) This query selects red stars (spectral type K), with -- large CaII triplet eq widths, with low errors on the CaII triplet -- equivalent widths. SELECT TOP 10 sl.plate,sl.mjd,sl.fiber, sl.caIIKside,sl.caIIKerr,sl.caIIKmask, sp.fehadop,sp.fehadopunc,sp.fehadopn, sp.loggadopn,sp.loggadopunc,sp.loggadopn FROM sppLines AS sl JOIN sppParams AS sp ON sl.specobjid = sp.specobjid WHERE fehadop < -3.5 AND fehadopunc between 0.01 and 0.5 and fehadopn > 3Load Query Copy link to this query
-- This sample query find all objects with spectra -- classified as stars. The query also checks that zWarning has no bits set, -- meaning that there are no known problems with the spectra. -- Other possible values with of class are 'QSO', 'GALAXY' and 'UNKNOWN'. SELECT TOP 100 specObjID FROM SpecObj WHERE class = 'STAR' AND zWarning = 0Load Query Copy link to this query
-- Provide a list of moving objects consistent with an asteroid. -- This sample query uses the 'as' syntax, which allows you to -- give your own names to columns in the results. -- This query is an example of a situation where you must -- search the full PhotoObj view, since the -- columns rowv and colv are not in PhotoTag. SELECT TOP 10 objID, ra, dec, sqrt( power(rowv,2) + power(colv, 2) ) as velocity FROM PhotoObj WHERE (power(rowv,2) + power(colv, 2)) > 50 AND rowv != -9999 and colv != -9999Load Query Copy link to this query
-- A query to list plates that have objects in common. -- Returns the pairs of plates, the total number of nights -- on which the objects they have in common have been observed, the progam to -- which the special plate belongs, and the number of objects the plates -- have in common. SELECT first.plate, other.plate, COUNT(DISTINCT other.mjd) + COUNT(DISTINCT first.mjd) AS nightsObserved, otherPlate.programname, count(DISTINCT other.bestObjID) AS objects FROM SpecObjAll first JOIN SpecObjAll other ON first.bestObjID = other.bestObjID JOIN PlateX AS firstPlate ON firstPlate.plate = first.plate JOIN PlateX AS otherPlate ON otherPlate.plate = other.plate WHERE first.scienceprimary = 1 AND other.scienceprimary = 0 AND other.bestObjID > 0 GROUP BY first.plate, other.plate, otherPlate.programname ORDER BY nightsObserved DESC, otherPlate.programname, first.plate, other.plateLoad Query Copy link to this query
-- Find galaxies that are blended with a star, and output the -- deblended galaxy magnitudes. -- This query introduces the use of multiple tables or views with a table JOIN clause. -- You can assign nicknames to tables as in the FROM clause below. Since you are using -- multiple tables, you must specify which table each quantity in the SELECT clause -- comes from. The "ON " part of the JOIN clause specifies the joining -- condition between the two tables, which is achieved by requiring that a quantity -- present in both tables be equal. SELECT TOP 10 G.ObjID, G.u, G.g, G.r, G.i, G.z -- get the ObjID and final mags FROM Galaxy AS G -- use two Views, Galaxy and Star, as a JOIN Star AS S -- convenient way to compare objects ON G.parentID = S.parentID -- JOIN condition: star has same parent WHERE G.parentID > 0 -- object was deblendedLoad Query Copy link to this query
-- This query uses the OUTER APPLY construct to apply a -- table-valued function to the results of a query. -- ( See also example below of checking whether a single point is in the SDSS footprint.) -- In this example, we use the fFootPrintEq function which returns a -- a non-NULL value ("POLYGON") if the area specified by the RA, dec and -- radius is inside the SDSS footprint. -- For each point in the input list, in this case the result of a query -- on PhotoObj, return "yes" or "no" depending on whether the point is in -- the SDSS footprint or not, along with any other needed columns. -- Note that this is really a trivial example since every point in PhotoObj -- is already in the SDSS footprint. To be really meaningful, a query like -- this needs to be run on a list of RA, decs that may or may not be in the -- in the SDSS footprint. This can be done using a MyDB table in CasJobs -- containing the list of points, for example, or by uploading a list in -- the Object Crossid tool. SELECT top 100 objID, ra, dec, (CASE WHEN q.type IS NULL THEN 'NO' ELSE 'YES' END) AS found FROM PhotoObj AS p OUTER APPLY dbo.fFootprintEq(ra,dec,0.1) AS q WHERE (ra BETWEEN 179.5 AND 182.3) AND (dec BETWEEN -1.0 AND 1.8) -- Checking the footprint for a single point with the fInFootprintEq scalar function. SELECT dbo.fInFootprintEq(180, -0.5, 0.2) -- Or if you have a table containing ra,dec values (for example a MyDB table -- in CasJobs), you can do something lile: SELECT dbo.fInFootprintEq(t.ra, t.dec, 0.1) FROM MyTable_10 AS tLoad Query Copy link to this query
-- The Clean Photometry sample query above showed how -- to select only objects for which SDSS-III imaging pipeline has declared -- the photometry clean. Usually, it is sufficient to search only the CLEAN flag; -- but in some contexts, it is important to know what conditions -- are required for the CLEAN flag to be set. The imaging pipeline sets the -- CLEAN flag based on the values of other flags; these necessary values are -- different for stars and galaxies. The version of this sample query for stars -- can be found in the Clean photometry - Stars sample query. -- For galaxies (i.e. not using PSF mags): Again use only PRIMARY objects. Other -- cuts are nearly the same, but remove the cut on EDGE. Possibly also remove -- the cut on INTERP flags. -- In this query, the human-readable flag names (through calls to the flag -- functions have been replaced with explicit values. Using explicit values for flags -- makes the queries run much faster. SELECT TOP 10 u,g,r,i,z,ra,dec, flags_r FROM Galaxy WHERE ra BETWEEN 180 and 181 AND dec BETWEEN -0.5 and 0.5 AND ((flags_r & 0x10000000) != 0) -- detected in BINNED1 AND ((flags_r & 0x8100000c00a0) = 0) -- not NOPROFILE, PEAKCENTER, NOTCHECKED, PSF_FLUX_INTERP, SATURATED, -- or BAD_COUNTS_ERROR. -- if you want to accept objects with interpolation problems for PSF mags, -- change this to: AND ((flags_r & 0x800a0) = 0) AND (((flags_r & 0x400000000000) = 0) or (psfmagerr_r <= 0.2)) -- not DEBLEND_NOPEAK or small PSF error -- (substitute psfmagerr in other band as appropriate) AND (((flags_r & 0x100000000000) = 0) or (flags_r & 0x1000) = 0) -- not INTERP_CENTER or not COSMIC_RAY - omit this AND clause if you want to -- accept objects with interpolation problems for PSF mags.Load Query Copy link to this query
-- Galaxies with bluer centers, by Michael Strauss. For all galaxies with r_Petro < 18, -- not saturated, not bright, and not edge, give me those with centers appreciably bluer -- than their outer parts, i.e., define the center color as: u_psf - g_psf and define -- the outer color as: u_model - g_model; give me all objs which have -- (u_model - g_model) - (u_psf - g_psf) < -0.4 -- -- Another flags-based query. -- NOTE: This query takes a long time to run without the "TOP 1000". SELECT TOP 1000 modelMag_u, modelMag_g, objID FROM Galaxy WHERE ( Flags & (dbo.fPhotoFlags('SATURATED') + dbo.fPhotoFlags('BRIGHT') + dbo.fPhotoFlags('EDGE')) ) = 0 and petroRad_r < 18 and ((modelMag_u - modelMag_g) - (psfMag_u - psfMag_g)) < -0.4Load Query Copy link to this query
-- Diameter-limited sample of galaxies from James Annis. -- Another query showing the use of flags, now using the bitwise '|' (or). -- NOTE: This query takes a long time to run without the "TOP 10", please see below for a faster version. SELECT TOP 10 run, camCol, rerun, field, objID, ra, dec FROM Galaxy WHERE ( flags & (dbo.fPhotoFlags('BINNED1') | dbo.fPhotoFlags('BINNED2') | dbo.fPhotoFlags('BINNED4')) ) > 0 and ( flags & (dbo.fPhotoFlags('BLENDED') | dbo.fPhotoFlags('NODEBLEND') | dbo.fPhotoFlags('CHILD')) ) != dbo.fPhotoFlags('BLENDED') and ( (flags & dbo.fPhotoFlags('NOPETRO') = 0) and petroR50_i >-- A much faster way to do this query is to substitute the actual flag values rather -- than calling the dbo.fPhotoFlags functions for each row selected by the query. -- Invoking these functions for potentially millions of rows is quite expensive. You -- can avoid this by first running the 4 quick "pre-queries" shown below, with the -- indicated values returned from each query. Then use these values to substitute -- in the original query as shown in the last query below. 1) SELECT (dbo.fPhotoFlags('BINNED1') | dbo.fPhotoFlags('BINNED2') | dbo.fPhotoFlags('BINNED4')) -- This returns the value 1879048192. 2) SELECT (dbo.fPhotoFlags('BLENDED') | dbo.fPhotoFlags('NODEBLEND') | dbo.fPhotoFlags('CHILD')) -- This returns the value 88. 3) SELECT dbo.fPhotoFlags('BLENDED') -- This returns 8. 4) SELECT dbo.fPhotoFlags('NOPETRO') -- This returns 256. -- Finally, here is the original query with these values instead of the function calls. SELECT TOP 10 run, camCol, rerun, field, objID, ra, dec FROM Galaxy WHERE ( flags & 1879048192 ) > 0 and ( flags & 88 ) != 8 and ( (flags & 256 = 0) and petroR50_i > 15)Load Query Copy link to this query
-- A version of the LRG sample, by James Annis. -- Not precisely the same version as that used in target selection. -- Another query with many conditions and flag tests. -- As with the previous example, this query will run much faster if -- the flag function calls are replaced with explicit values. SELECT TOP 10 run, camCol, rerun, field, objID, ra, dec FROM Galaxy WHERE ( ( flags & (dbo.fPhotoFlags('BINNED1') | dbo.fPhotoFlags('BINNED2') | dbo.fPhotoFlags('BINNED4')) ) > 0 and ( flags & (dbo.fPhotoFlags('BLENDED') | dbo.fPhotoFlags('NODEBLEND') | dbo.fPhotoFlags('CHILD')) ) != dbo.fPhotoFlags('BLENDED') and ( flags & (dbo.fPhotoFlags('EDGE') | dbo.fPhotoFlags('SATURATED')) ) = 0 and petroMag_i > 17.5 and (petroMag_r > 15.5 or petroR50_r > 2) and (petroMag_r > 0 and g > 0 and r > 0 and i > 0) and ( (petroMag_r-extinction_r) < 19.2 and (petroMag_r - extinction_r < (13.1 + (7/3) * (dered_g - dered_r) + 4 * (dered_r - dered_i) - 4 * 0.18) ) and ( (dered_r - dered_i - (dered_g - dered_r)/4 - 0.18) < 0.2) and ( (dered_r - dered_i - (dered_g - dered_r)/4 - 0.18) > -0.2) -- dered_ quantities already include reddening and ( (petroMag_r - extinction_r + 2.5 * LOG10(2 * 3.1415 * petroR50_r * petroR50_r)) < 24.2) ) or ( (petroMag_r - extinction_r < 19.5) and ( (dered_r - dered_i - (dered_g - dered_r)/4 - 0.18) > (0.45 - 4 * (dered_g - dered_r)) ) and ( (dered_g - dered_r) > (1.35 + 0.25 * (dered_r - dered_i)) ) ) and ( (petroMag_r - extinction_r + 2.5 * LOG10(2 * 3.1415 * petroR50_r * petroR50_r) ) < 23.3 ) )Load Query Copy link to this query
-- Create a count of galaxies for each of the HTM triangles. -- Galaxies should satisfy a certain color cut, like -- 0.7u-0.5g-0.2i<1.25 && r<21.75, output it in a form -- adequate for visualization. SELECT (htmID / power(2,24)) as htm_8 , -- group by 8-deep HTMID (rshift HTM by 12) avg(ra) as ra, avg(dec) as [dec], count(*) as pop -- return center point and count for display FROM Galaxy -- only look at galaxies WHERE (0.7*u - 0.5*g - 0.2*i) < 1.25 -- meeting this color cut and r < 21.75 -- brighter than 21.75 magnitude in red band. group by (htmID /power(2,24)) -- group into 8-deep HTM buckets.Load Query Copy link to this query
-- DR8 includes data on visual galaxy morphologies from the -- Galaxy Zoo project. Galaxy Zoo is a web-based project -- that used the collective efforts of about 100,000 volunteer -- citizen scientists to classify more than one million -- SDSS DR7 Main Galaxy Sample (MGS) galaxies. -- Full details on the classification process, including the operation -- of the site and estimates of classification accurary, are given in -- Lintott et al. (2008). -- Galaxy Zoo data are contained in tables that begin with zoo -- in the DR8 schema. For each galaxy, available data includes its -- SDSS object ID and weighted probabilities for each of six different -- morphological classifications based on counts of volunteer "votes". -- Full details on what data the Galaxy Zoo catalog contains are given -- in Lintott et al. (2010). -- The first query below finds the weighted probability that a given galaxy -- has each of the six morphological classifications. -- The second query finds 100 galaxies that have clean photometry, -- at least 10 Galaxy Zoo volunteer votes and at least an 80% probability -- of being clockwise spirals. SELECT objid, nvote, p_el as elliptical, p_cw as spiralclock, p_acw as spiralanticlock, p_edge as edgeon, p_dk as dontknow, p_mg as merger FROM ZooNoSpec WHERE objid = 1237656495650570395 -- Second query: find likely clockwise spirals. SELECT TOP 100 g.objid, zns.nvote, zns.p_el as elliptical, zns.p_cw as spiralclock, zns.p_acw as spiralanticlock, zns.p_edge as edgeon, zns.p_dk as dontknow, zns.p_mg as merger FROM Galaxy as G JOIN ZooNoSpec AS zns ON G.objid = zns.objid WHERE g.clean=1 and zns.nvote >= 10 and zns.p_cw > 0.8Load Query Copy link to this query
-- The Clean Photometry sample query above showed how -- to select only objects for which SDSS-III imaging pipeline has declared -- the photometry clean. Usually, it is sufficient to search only the CLEAN flag; -- but in some contexts, it is important to know what conditions -- are required for the CLEAN flag to be set. The imaging pipeline sets the -- CLEAN flag based on the values of other flags; these necessary values are -- different for stars and galaxies. The version of this sample query for galaxies -- can be found in the Clean photometry - Galaxies sample query. -- For queries on star objects, when you use PSF mags, use only PRIMARY objects -- and the flag combinations indicated below. If you use the Star view as this sample -- query does, you will get only primary objects; otherwise you will need to add -- a mode=1" constraint. For example, if you are interested in r-band magnitudes -- of objects, perform the following checks (add analogous checks with AND for -- other bands if you are interested in multiple magnitudes or colors). -- In this query, the human-readable flag names (through calls to the flag -- functions have been replaced with explicit values. Using explicit values for flags -- makes the queries run much faster. SELECT TOP 10 u,g,r,i,z,ra,dec, flags_r FROM Star WHERE ra BETWEEN 180 and 181 AND dec BETWEEN -0.5 and 0.5 AND ((flags_r & 0x10000000) != 0) -- detected in BINNED1 AND ((flags_r & 0x8100000c00a4) = 0) -- not EDGE, NOPROFILE, PEAKCENTER, NOTCHECKED, PSF_FLUX_INTERP, -- SATURATED, or BAD_COUNTS_ERROR AND (((flags_r & 0x400000000000) = 0) or (psfmagerr_r <= 0.2)) -- not DEBLEND_NOPEAK or small PSF error -- (substitute psfmagerr in other band as appropriate) AND (((flags_r & 0x100000000000) = 0) or (flags_r & 0x1000) = 0) -- not INTERP_CENTER or not COSMIC_RAY"Load Query Copy link to this query
-- Search for Cataclysmic Variables and pre-CVs with White Dwarfs and -- very late secondaries, using simple color cuts from Paula Szkody. -- This is a simple query that uses math in the WHERE clause. SELECT TOP 100 run, camCol, rerun, field, objID, u, g, r, i, z, ra, dec -- Just get some basic quantities FROM Star -- From all stellar primary detections WHERE u - g < 0.4 and g - r < 0.7 and r - i > 0.4 and i - z > 0.4-- that meet the color criteriaLoad Query Copy link to this query
-- Find binary stars with specific colors. -- At least one of them should have the colors of a white dwarf. SELECT TOP 100 s1.objID as s1, s2.objID as s2 FROM Star AS S1 -- S1 is the white dwarf JOIN Neighbors AS N ON S1.objID = N.objID -- N is the precomputed neighbors lists JOIN Star AS S2 ON S2.objID = N.NeighborObjID -- S2 is the second star WHERE N.NeighborType = dbo.fPhotoType('Star') -- and S2 is a star and N.distance < .05 -- the 3 arcsecond test and ((S1.u - S1.g) < 0.4 ) -- and S1 meets Paul Szkodys color cut for and (S1.g - S1.r) < 0.7 -- white dwarfs. and (S1.r - S1.i) > 0.4 and (S1.i - S1.z) > 0.4Load Query Copy link to this query
-- Another example of using the sppLines table generated by -- the SEGUE Spectroscopic Parameter Pipeline. This sample query -- selects low metallicity stars ([Fe/H] < -3.5) where more than three -- different measures of feh are ok and are averaged. SELECT TOP 10 sl.plate, sl.mjd, sl.fiber, sl.caIIKside, sl.caIIKerr, sl.caIIKmask, sp.fehadop, sp.fehadopunc,sp. fehadopn, sp.loggadopn,sp.loggadopunc,sp.loggadopn FROM sppLines AS sl JOIN sppParams AS sp ON sl.specobjid = sp.specobjid WHERE fehadop < -3.5 and fehadopunc between 0.01 and 0.5 AND fehadopn > 3Load Query Copy link to this query
-- This sample query searches the sppParams table, which contains -- stellar parameters calculated by the SEGUE Spectroscopic Parameter Pipeline. -- The sample query selects spectroscopic stars in specific ranges of metallicity, -- gravity and temperature (with some flag checks). SELECT top 10 so.bestobjid, so.specobjid, so.plate, so.mjd, so.fiberid, sp.teffadop, sp.fehadop, sp.loggadop, sp.snr, sp.flag FROM specobjall so -- get the stellar params for each spectrum. -- the sciencePrimary=1 guarantees no repeats in this query, but not all -- these spectra will be from SEGUE JOIN sppparams sp ON so.specobjid = sp.specobjid and so.sciencePrimary=1 -- get the photometry info. note the dr7" context prefix that will go -- away when we get the dr8 imaging WHERE sp.teffadop > 4500 and sp.teffadop < 5500 and fehadop > -2 and fehadop < -1.5 and loggadop > 2 and loggadop < 3 -- demand that the first two letters of the sspp flags be n (see web page docs) -- the like and % are for sub-string comparisons and sp.flag like '_n%' and sp.snr > 30Load Query Copy link to this query
-- Select stars surrounding the open cluster M67, include positions, color mag -- and propermotion and pm errors. SELECT TOP 100 s.ra, s.dec, s.psfmag_g, (s.psfmag_g - s.psfmag_r) as gmr, pm.pmra, pm.pmdec, pm.pmraerr, pm.pmdecerr, pm.pml, pm.pmb FROM star s JOIN propermotions pm ON s.objid = pm.objid WHERE s.ra between 132.85-0.25 and 132.85+0.25 and s.dec between 11.82-0.25 and 11.82+0.25Load Query Copy link to this query
-- The easiest way to find apogee is by finding objects whose spectra have -- been classified as apogee. This sample query searches the SpecObj -- table for the IDs and redshifts of objects with the class column equal to 'QSO' SELECT TOP 100 specObjID, z FROM SpecObj WHERE class = 'QSO' AND zWarning = 0Load Query Copy link to this query
-- Low-z QSO candidates using the color cuts from Gordon Richards. -- Also a simple query with a long WHERE clause. SELECT TOP 100 g, run, rerun, camcol, field, objID FROM Galaxy WHERE ( (g <= 22) and (u - g >= -0.27) and (u - g < 0.71) and (g - r >= -0.24) and (g - r < 0.35) and (r - i >= -0.27) and (r - i < 0.57) and (i - z >= -0.35) and (i - z < 0.70) )Load Query Copy link to this query
-- This sample query is a useful quasar query (from Sebastian Jester). -- Getting magnitudes for spectroscopic apogee - retrieves photometry. -- This query uses the SpecPhoto view of the SpecPhotoAll table, which is a pre-computed join -- of the important fields in the SpecObjAll and PhotoObjAll tables. It is very convenient and much -- faster to use this when you can instead of doing the join yourself. -- Getting FIRST data for spectroscopic apogee - returns only those apogee that have -- matches in the FIRST (Far-InfraRed Survey Telescope) table. SELECT TOP 100 sp.ra,sp.dec,sp.z, sp.psfmag_i-sp.extinction_i AS mag_i, peak,integr FROM SpecPhoto AS sp INNER JOIN FIRST AS f ON sp.objid = f.objid WHERE class = 'QSO'Load Query Copy link to this query
-- This query selects Luminous Red Galaxies between redshifts 0.4 and 0.65, -- in a quasi-mass limited manner. This query is very similar to part of the -- selection of BOSS targets (the so-called CMASS LRGs). SELECT TOP 10 * FROM photoprimary WHERE (dered_r-dered_i) < 2 AND cmodelmag_i-extinction_i BETWEEN 17.5 AND 19.9 AND (dered_r-dered_i) - (dered_g-dered_r)/8. > 0.55 AND fiber2mag_i < 21.7 AND devrad_i < 20. AND dered_i < 19.86 + 1.60*((dered_r-dered_i) - (dered_g-dered_r)/8. - 0.80)Load Query Copy link to this query
-- This query does a table JOIN between the Portsmouth Passive (stellarMassPassivePort) -- and Portsmouth Starforming (stellarMassStarformingPort) and Wisconsin PCA (stellarMassPCAWiscBC03) -- tables and selects the stellar masses for a particular PLATE-MJD: SELECT TOP 10 passive.fiberid as fiberID, passive.ra, passive.dec, passive.z as z_noqso, passive.zerr as z_noqso_err, passive.logmass as passive_logmass, starforming.logmass as starforming_logmass, pca.mstellar_median as pca_logmass FROM stellarMassPassivePort AS passive JOIN stellarMassStarformingPort AS starforming ON passive.specobjid = starforming.specobjid JOIN stellarMassPCAWiscBC03 AS pca ON passive.specobjid = pca.specobjid WHERE passive.plate = 3606 AND passive.mjd = 55182 AND pca.warning=0Load Query Copy link to this query
-- This query does a table JOIN between the Portsmouth Emission Lines (emissionLinesPort) -- and Wisconsin PCA (stellarmMassPCAWisc) and the SpecObj tables and selects -- the velocity dispersion for a particular PLATE-MJD: SELECT TOP 10 emline.fiberid as fiberID, emline.ra, emline.dec, emline.z as z_noqso, emline.zerr as z_noqso_err, emline.sigmaStars as emline_vdisp, emline.sigmaStarsErr as emline_vdisp_err, pca.vdisp_median as pca_vdisp, pca.vdisp_err as pca_vdisp_err, sp.veldisp as sp_vdisp, sp.veldisperr as sp_vdisp_err FROM emissionLinesPort AS emline JOIN stellarMassPCAWisc AS pca ON emline.specobjid = pca.specobjid JOIN specObj as sp ON emline.specobjid = sp.specobjid WHERE emline.plate = 3606 AND emline.mjd = 55182 AND pca.warning=0Load Query Copy link to this query
-- Get all PLATES observed for a given LOCATION_ID: -- The APOGEE survey is conducted along a number of different lines of -- sight, each referred to as as a "field" or "location" -- (interchangeably). Each field has a name and an id number -- (LOCATION_ID). The stars in each field are observed multiple times on -- multiple visits, on different MJDs. These may involve one or more -- physical plug plates. -- -- To find all the plate visits, one can search as follows (for LOCATION_ID -- 4105): SELECT plate, mjd FROM apogeePlate WHERE location_id=4105 -- The same field can be searched by its name (in this case 'M13'): --SELECT plate, mjd FROM apogeePlate WHERE name = 'M13'Load Query Copy link to this query
-- Get ASPCAP parameters and errors for all stars that were targeted as part of the main APOGEE survey: -- The stellar parameters are available for all stars that had ASPCAP run -- on them. However, this includes some spectra known to be bad as well as -- stars targeted as part of ancillary programs of various -- sorts. Restricting to the good, main survey targets requires checking on -- target and catalog flags, as in the examples below: SELECT TOP 100 s.apogee_id,s.ra, s.dec, s.glon, s.glat, s.vhelio_avg,s.vscatter, a.teff, a.teff_err, a.logg, a.logg_err, a.m_h, a.m_h_err, a.alpha_m, a.alpha_m_err, dbo.fApogeeAspcapFlagN(a.aspcapflag), dbo.fApogeeStarFlagN(s.starflag) FROM apogeeStar s JOIN aspcapStar a on a.apstar_id = s.apstar_id WHERE (a.aspcapflag & dbo.fApogeeAspcapFlag('STAR_BAD')) = 0 and (s.apogee_target1 & (dbo.fApogeeTarget1('APOGEE_SHORT')+ dbo.fApogeeTarget1('APOGEE_INTERMEDIATE')+ dbo.fApogeeTarget1('APOGEE_LONG'))) != 0Load Query Copy link to this query
-- Get parameters for all stars with [Fe/H] < -2 with no BAD FLAGS set: -- You can also select a subset of the stars based on their -- properties. This example finds a set of metal-poor stars, without any -- flags set indicating that the observations or analysis is bad. SELECT TOP 100 s.apogee_id,s.ra, s.dec, s.glon, s.glat, s.vhelio_avg,s.vscatter, a.teff,a.logg, a.m_h, a.alpha_m, dbo.fApogeeAspcapFlagN(a.aspcapflag), dbo.fApogeeStarFlagN(s.starflag) FROM apogeeStar s JOIN aspcapStar a on a.apstar_id = s.apstar_id WHERE (a.aspcapflag & dbo.fApogeeAspcapFlag('STAR_BAD')) = 0 and a.teff > 0 and a.m_h < -2Load Query Copy link to this query
-- Get ASPCAP parameters for stars flagged as known cluster members: -- In addition to selecting main survey targets, you can -- select other objects according how they were selected. This is -- an example of selecting objects chosen to be calibrator stars in -- clusters with known metallicities (APOGEE_CALIB_CLUSTER). SELECT TOP 100 s.apogee_id,s.ra, s.dec, s.glon, s.glat, s.vhelio_avg,s.vscatter, a.teff, a.teff_err, a.logg, a.logg_err, a.m_h, a.m_h_err, a.alpha_m, a.alpha_m_err, dbo.fApogeeAspcapFlagN(a.aspcapflag), dbo.fApogeeStarFlagN(s.starflag) FROM apogeeStar s JOIN aspcapStar a on a.apstar_id = s.apstar_id WHERE (a.aspcapflag & dbo.fApogeeAspcapFlag('STAR_BAD')) = 0 and (s.apogee_target2 & (dbo.fApogeeTarget2('APOGEE_CALIB_CLUSTER')) != 0)Load Query Copy link to this query
-- Get proper motions, JHK mag and errors, K-band extinction and radial -- velocities, for stars with RVs >-- There is photometric data associated with each target, including proper -- motions and other information. This example looks for such information -- for larger (heliocentric) radial velocity stars. It restricts to objects -- with good measured ASPCAP parameters. This requires joining the apogeeStar and -- aspcapStar tables with the apogeeObject table, which has the target information. SELECT TOP 100 star.apogee_id, star.ra, star.dec, star.glon, star.glat, star.vhelio_avg, star.vscatter, obj.j, obj.h, obj.k, obj.ak_targ, obj.ak_targ_method, obj.ak_wise, aspcap.teff, aspcap.logg, aspcap.m_h FROM apogeeStar star JOIN aspcapStar aspcap on aspcap.apstar_id = star.apstar_id JOIN apogeeObject obj on aspcap.target_id = obj.target_id WHERE (aspcap.aspcapflag & dbo.fApogeeAspcapFlag('STAR_BAD')) = 0 and aspcap.teff > 0 and (star.vhelio_avg > 300) and (star.starflag & dbo.fApogeeStarFlag('SUSPECT_RV_COMBINATION')) = 0 and star.nvisits > 2 order by aspcap.apogee_idLoad Query Copy link to this query
-- Get ASPCAP parameters and targeting flags for all stars with 1 degree of a cluster center: -- CASJobs allows search for objects near any particular RA and Dec. The -- following example searches for ASPCAP parameters and targeting flags for -- the stars observed near M13. SELECT star.apstar_id, star.apogee_id, star.ra, star.dec, star.glon, star.glat, star.apogee_target1, star.apogee_target2, aspcap.teff,aspcap.logg,aspcap.m_h FROM apogeeStar star JOIN dbo.fGetNearbyApogeeStarEq(250.423458,36.461306,60) near on star.apstar_id=near.apstar_id JOIN aspcapStar aspcap on aspcap.apstar_id = star.apstar_idLoad Query Copy link to this query
-- Get individual RVs from individual visits, the ASPCAP parameters for the combined -- spectra for stars which have more than 6 visits: -- Each star is visited several times, and in some case many times, in -- order to build up signal-to-noise and to detect radial velocity -- variations. The information about each visit to each star is in the -- apogeeVisit table. One could join this table with apogeeStar on -- apogee_id in order to literally find all visits to each star. However, -- in this example we are interested in just finding those visits that -- actually contributed to each combined spectrum. In this case, bad visits -- are excluded and commissioning data and survey data are kept separate -- (not combined). To find these stars, one may use the apogeeStarVisit -- table in CAS, or the array visit_pk which exists for each star in the -- allStar file. Alternatively, if you wanted to find all visits to a -- particular star, one could replace in the code below apogeeStarVisit -- with apogeeStarAllVisit and visit_pk with all_visit_pk. SELECT top 100 visit.*, aspcap.teff, aspcap.logg, aspcap.m_h FROM apogeeVisit visit JOIN apogeeStarVisit starvisit on visit.visit_id = starvisit.visit_id JOIN aspcapStar aspcap on aspcap.apstar_id = starvisit.apstar_id JOIN apogeeStar star on star.apstar_id = starvisit.apstar_id WHERE (aspcap.aspcapflag & dbo.fApogeeAspcapFlag('STAR_BAD')) = 0 and aspcap.teff > 0 and (star.apogee_target1 & dbo.fApogeeTarget1('APOGEE_LONG')) > 0 and star.nvisits > 6 ORDER BY visit.apogee_idLoad Query Copy link to this query
-- Get APOGEE_IDs and SDSS/BOSS plate, mjd, fiberid for all stars that have both APOGEE and SEGUE spectra: -- A small number of objects have been observed both in the optical with -- the SDSS and/or BOSS spectrographs and in the infrared with the APOGEE -- spectrograph. The examples below finds all matches between primary -- SDSS/BOSS spectra and APOGEE stars with a 3 arcsec tolerance for such -- cases (note that there are some cases where an entry in one catalog -- matches multiple entries in the other). SELECT TOP 50 specobj.plate as specobj_plate, specobj.mjd as specobj_mjd, specobj.fiberid as specobj_fiberid, specobj.ra as specobj_ra, specobj.dec as specobj_dec, star.apstar_id, star.ra as star_ra, star.dec as star_dec FROM apogeeStar AS star CROSS APPLY dbo.fGetNearestSpecObjEq( star.ra, star.dec, 0.05) AS near JOIN specobj ON near.specobjid=specobj.specobjidLoad Query Copy link to this query
-- Get SDSS ugriz photometry, errors and flags, ASPCAP parameters for the APOGEE stars with b >-- In addition to matching to the SDSS spectroscopy, you can also match to -- the SDSS photometric imaging data. In this case, we only give an example -- within CAS. To do this purely with flat files requires either -- downloading the full photometric catalog (about 3 Tbytes) or the -- datasweep" files (about 300 Gbytes), both described in the imaging data -- access documentation, and constructing an efficient flat-file method to -- do the matching. For most purposes, CAS will be the right way to do this. SELECT TOP 50 photoobj.run, photoobj.camcol, photoobj.field, photoobj.obj, photoobj.psfmag_u, photoobj.psfmag_g, photoobj.psfmag_r, photoobj.psfmag_i, photoobj.psfmag_z, photoobj.ra as photoobj_ra, photoobj.dec as photoobj_dec, star.apstar_id, star.ra as star_ra, star.dec as star_dec, aspcap.teff, aspcap.m_h, aspcap.logg FROM apogeeStar AS star CROSS APPLY dbo.fGetNearestObjEq( star.ra, star.dec, 0.05) AS near JOIN photoobj ON near.objid=photoobj.objid JOIN aspcapStar as aspcap ON star.apstar_id = aspcap.apstar_id WHERE star.glat > 60. and aspcap.teff > 0 "Load Query Copy link to this query
-- An example of how to use the eBOSS QSO Variability VAC -- Get the structure function parameters (A,gamma) from PTF photometry for all quasar targets, -- except in the stripe region. -- The cut VAR_CHI2>2 and VAR_A>0.1 selects objects with a significantly varying lightcurve. SELECT TOP 100 RA, DEC, VAR_A, VAR_GAMMA, VAR_CHI2 FROM qsoVarPTF WHERE qsoVarPTF.VAR_CHI2>2 AND qsoVarPTF.VAR_A>0.1Load Query Copy link to this query
-- Find all MaNGA data cubes of galaxies in the main or ancillary target sample. -- Get the unique observation identifier (plateifu), object identifier (mangaid), -- object coordinates, primary sample targeting bit (mngtarg1) and summary data -- reduction quality bit (drp3qual) -- A basic SELECT-FROM-WHERE query. SELECT TOP 2000 plateifu, -- Get the unique object ID, mangaid, objra, objdec, mngtarg1, drp3qual -- and other quantities FROM mangadrpall -- From the drpall catalog WHERE mngtarg1 != 0 or mngtarg3 != 0 -- Require that either mngtarg1 is nonzero -- (galaxy in the primary, secondary, or color-enhanced sample) or that -- mngtarg3 is nonzero (galaxy is an ancillary program target)Load Query Copy link to this query
-- Find all MaNGA data cubes of galaxies in the main -- or ancillary target sample that are of good reduction quality -- Use the largest 127-fiber bundles, have NSA redshift >-- and have NSA elliptical petrosian stellar mass > 10^10 Msun. SELECT TOP 2000 plateifu, -- Get the unique object ID, mangaid, objra, objdec, mngtarg1, drp3qual -- and other quantities FROM mangadrpall -- From the drpall catalog WHERE ((mngtarg1 != 0 or mngtarg3 != 0) and (drp3qual < 10000) and (ifudesignsize = 127) and (nsa_z > 0.03) and (nsa_elpetro_mass >1e10))Load Query Copy link to this query
-- Find all MaNGA data cubes of galaxies in the -- Primary+ (Primary v1_2_0 and color enhanced v1_2_0) sample -- that are of good reduction quality. SELECT TOP 2000 plateifu, -- Get the unique object ID, mangaid, objra, objdec, mngtarg1, drp3qual -- and other quantities FROM mangadrpall -- From the drpall catalog WHERE (((mngtarg1 & (power(2,10)+power(2,12))) != 0) -- Either bit 10 or 12 of mngtarg1 and ((drp3qual & power(2,30)) = 0)) -- Not bit 30 of drp3qualLoad Query Copy link to this query
-- Find all MaNGA targets in the Primary sample allocated to a tile -- Return the unique identifier (mangaID), the tile they were allocated -- to (manga_tileid) and the size of the IFU they were allocated -- (ifudesignsize) SELECT TOP 100 mangaID,manga_tileid,ifudesignsize FROM mangatarget WHERE (manga_target1 & (power(2,10)) != 0) AND manga_tileid > 0 AND IFUDESIGNSIZE > 0 -- Find all of the MaNGA data cubes that were in the Primary+ sample --- match to the target catalog and return the minimum and maximum -- redshift each target could have been observed over (ezmin, ezmax). -- These can be used to calculate Vmax weights. /* ( To run second query, click 'Load Query', delete first query, uncomment this one and press Submit) SELECT m.plateifu,t.mangaID,t.ezmin,t.ezmax,m.mngtarg1 FROM mangatarget as t, mangadrpall as m WHERE t.mangaID = m.mangaID AND ((mngtarg1 & (power(2,10)+power(2,12))) != 0) ORDER BY m.plateifu */Load Query Copy link to this query
-- An example of using the MaNGA Data Analysis Pipeline (DAP) -- Find all galaxies with a star-formation rate within one effective radii >-- solar masses per year. SELECT TOP 100 mangaid, objra, objdec, daptype, z, sfr_1re FROM mangaDAPall WHERE sfr_1re > 5 and daptype = 'HYB10-GAU-MILESHC'Load Query Copy link to this query
-- Selecting G-stars from mastar_goodstars_params -- This query returns the stellar parameters for the first 100 G-stars in the mastar_goodstars table. -- G-stars are selected using a temperature criterion. SELECT TOP 100 mangaid, teff_med, logg_med, feh_med, alpha_med FROM mastar_goodstars_params WHERE teff_med BETWEEN 5000 AND 6000Load Query Copy link to this query
-- Selecting stars near cluster center -- This query returns the coordinates and parameters for stars within 0.5 degrees of -- the open cluster M67 (central coordinates 132.83, 11.82) in the mastar_goodstars_params -- the mastar_goodstars_params table that have been observed more than once (nvisits). SELECT mangaid, nvisits, ra, dec, teff_med, logg_med, feh_med, alpha_med FROM mastar_goodstars_params WHERE POWER(ra - 132.83, 2) + POWER(dec - 11.82, 2) < POWER(0.5, 2) AND nvisits >= 2Load Query Copy link to this query
-- Selecting High Velocity Stars in mastar_goodvisits -- This query returns radial velocities, uncertainties, and Gaia photometry -- for stars with velocities > 300 km/s. It restricts to stars with good velocity -- measurements through the v_errcode selection criteria. SELECT TOP 100 v.mangaid, v.plate, v.ifudesign, v.mjd, v.ra, v.dec, v.heliov, v.verr, g.m_g, g.bprpc FROM mastar_goodvisits AS v JOIN mastar_goodstars_xmatch_gaiaedr3 AS g ON g.mangaid = v.mangaid WHERE v.heliov > 300 AND v_errcode=0Load Query Copy link to this query
-- Search for K-type dwarfs using color criteria -- This query searches for K-type dwarfs using color cuts from SEGUE. -- Returns the gri magnitudes, plate ID and fiber bundle. -- Uses the mngtarg2 flag to select stars from the same photometry -- source catalog. Bit 8 is set for stars from the APASS system. --- Bit 11 is set for stars from the SDSS system. Both APASS and SDSS --- uses the SDSS filter bands. SELECT TOP 100 mangaid, psfmag_2, psfmag_3, psfmag_4, plate, ifudesign, mjd, photocat FROM mastar_goodvisits WHERE ( (mngtarg2 & POWER(2, 8)) <> 0 OR (mngtarg2 & POWER(2,11)) <>0 ) AND psfmag_3 BETWEEN 14.5 AND 19.0 AND (psfmag_2 - psfmag_3) BETWEEN 0.55 AND 0.75Load Query Copy link to this query
-- Retrieve MaStar parameters and Gaia photomery for stars near cluster center -- This query joins the mastar_goodvisits_params and mastar_goodstars_xmatch_gaiaedr3 tables -- to retrieve the parameters, Gaia photometry (G-band magnitude and BP-RP color), -- and reddening estimates from a 3D dust map -- for stars within 0.5 degrees of the open cluster M67 (central coordinates 132.833, 11.82) SELECT v.mangaid, v.plate, v.ifudesign, v.mjd, v.teff_med, v.logg_med, v.feh_med, v.alpha_med, g.m_g, g.bp_rp, g.ebv, g.bprpc FROM mastar_goodvisits_params AS v JOIN mastar_goodstars_xmatch_gaiaedr3 AS g ON g.mangaid = v.mangaid WHERE POWER(v.ra - 132.83, 2) + POWER(v.dec - 11.82, 2) < POWER(0.5, 2)Load Query Copy link to this query
-- Select SDSS-V BOSS pipeline CLASS=QSO (likely) quasars having -- pipeline z >= 3 with SDSS-V spectra in eFEDS plate program. SELECT plug_ra, plug_dec, z, zwarning, field, mjd, catalogid FROM spAll WHERE run2d='v6_0_4' AND class='QSO' AND z >= 3Load Query Copy link to this query
-- Select SDSS-V BOSS Pipeline results that include bitmasks 24 - 27 -- to match all BHM SPIDERS CLUSTERS eFEDS objects. -- The SDSSV_BOSS_TARGET0 bitmasks for BHM_SPIDERS_CLUSTERS-EFEDS-SDSS-REDMAPPER, -- BHM_SPIDERS_CLUSTERS-EFEDS-HSC-REDMAPPER, BHM_SPIDERS_CLUSTERS-EFEDS-LS-REDMAPPER, -- BHM_SPIDERS_CLUSTERS-EFEDS-EROSITA sum to 2^24+2^25+2^26+2^27=251658240 SELECT run2d, plate, mjd, fiberid FROM spAll WHERE run2d='v6_0_4' AND sdssv_boss_target0 & 251658240 != 0Load Query Copy link to this query
-- Select the combined eFEDS spectrum with a particular catalogid: SELECT * FROM spAll_eFEDS WHERE catalogid=6746969473Load Query Copy link to this query
-- Select all visits with a particular catalogid: SELECT * FROM spAll WHERE catalogid=6746969473Load Query Copy link to this query
-- Count the number of visits with a particular catalogid: SELECT count(*) AS counts FROM spAll WHERE catalogid=6746969473Load Query Copy link to this query
-- Select a sample of SDSS-V/eFEDS spectra from the DR18 spAll table, -- filtering on their spectroscopic properties. Return a list of -- URLs pointing to the spectrum viewer web app, which can e.g. be -- pasted into a web browser. SELECT CONCAT('<a target="_blank" href="', 'https://dr18.sdss.org/optical/spectrum/view', '?run2d=', run2d, '&plateid=', plate, '&mjd=', mjd, '&fiberid=', fiberid, '&action=search','">', 'https://dr18.sdss.org/optical/spectrum/view', '?run2d=', run2d, '&plateid=', plate, '&mjd=', mjd, '&fiberid=', fiberid, '&action=search','</a>') AS url FROM spAll WHERE z BETWEEN 0.2 AND 1.0 AND class = 'QSO' AND subclass = 'STARFORMING'Load Query Copy link to this query
SELECT TOP 100 STRING_AGG(CONVERT(NVARCHAR(max), mos_carton.carton), ',') WITHIN GROUP (ORDER BY mos_carton_to_target.priority ASC) as cartons, mos_tic_v8.id, mos_target.catalogid FROM mos_tic_v8 JOIN mos_catalog_to_tic_v8 on mos_tic_v8.id = mos_catalog_to_tic_v8.target_id JOIN mos_target on mos_target.catalogid = mos_catalog_to_tic_v8.catalogid JOIN mos_carton_to_target on mos_carton_to_target.target_pk = mos_target.target_pk LEFT OUTER JOIN mos_carton on mos_carton_to_target.carton_pk = mos_carton.carton_pk WHERE mos_catalog_to_tic_v8.best > 0 GROUP BY mos_tic_v8.id, mos_target.catalogidLoad Query Copy link to this query
SELECT TOP 100 mc.carton,tic.id, c2tic.catalogid, tic.gaiamag FROM mos_carton mc JOIN mos_carton_to_target mctt ON mc.carton_pk=mctt.carton_pk JOIN mos_target mt ON mt.target_pk=mctt.target_pk JOIN mos_catalog_to_tic_v8 c2tic ON c2tic.catalogid = mt.catalogid JOIN mos_tic_v8 tic on tic.id = c2tic.target_id WHERE c2tic.best > 0 AND tic.gaiamag < 15Load Query Copy link to this query